R Type Thermocouple Temperature, Transmitter DAT2045R Dip Switch Programmable.
The thermocouple Transmitter DAT2045R is a Din Rail mount Temperature transmitter with DIP Switch programmability.
Suitable for the following thermocouples.
K Type Thermocouples
J Type Thermocouples
S Type Thermocouples
R Type Thermocouples
B Type Thermocouples
T Type Thermocouples
The DAT2045R will linearize the voltage input and provide a 4-20mA output signal.
The DAT2045R is accurate to 0.1% full scale and has less than 0.02%/°f thermal drift.
It is possible to set the minimum and maximum values of the input and output ranges in any point of the scale, keeping the minimum span shown in the Data Sheet. Also high burn out indication or low burn out indication is selectable.
The DAT2045R is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
The DAT2045R is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.
The DAT2045R has internal cold junction compensation.
The calibration of zero and span values is made by the ZERO and SPAN potentiometers located on the top of device.