AC Current converter

The AC current converter DAT5023IAC A is designed to detect the TRMS value of the AC current signal from 0-5A, and 0-10A applied on its input, providing a voltage or current output signal. The measuring cable carrying the current it inserted through the case of the AC Current converter. This current is detected by a current transducer and converted into an industry standard signal using the internal signal conditioner.
The user can program the output ranges by the DIP-switches which are located on the side of DAT5023IAC AC current converter.
The calibration can be adjusted with the use of the zero and span potentiometers located on the top of the device behind the protected window.
The DAT5023I AC provides on the output side an auxiliary power supply source to connect both active and passive loads.
Other versions are a available.

DAT5023 I AC version B

• 0-20Amp.
• 0-25Amp.
• 0-30Amp.

DAT5023 I AC version C

• 0-40Amp.
• 0-50Amp.
• 0-60Amp.

The DAT5023IAC is accurate to 0.1% full scale and has less than 0.01%/°f thermal drift.
The 2000 Vac isolation between Input, power supply and output eliminates the effects of all ground loops and allows the use of the converter in heavy environmental conditions found in industrial applications.
The DAT5023IAC provides a power supply on the output side so both active and passive loads can be connected.
The DAT5023IAC is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
The DAT5023IAC is housed in a plastic enclosure of 27.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.